| Thickness: | |
|---|---|
| Color: | |
| Material: | |
| Size: | |
| Warranty: | |
| Quantity: | |
Queen Pro is one of KOOPPFs flagship glossy offerings. Our Top Paint Protection Film, TPU raw film is imported from USA and Glue is from Ashland.Instant self healing PPF and performance along with increased brightnessanti-fouling/corrosion,and self-healing characteristics. Queen Pro is offered in 7.5mil thickness. | |
PRODUCT PARAMETER
ISO9001 / Quality management system
IATF16949 / Automotive Industry Quality Management System
SGS / RoHs & Reach certification
| CATEGORY | VALUE | CATEGORY | VALUE |
| Top Coating | Heat Self Healing Coating | Temperature Resistance | -40° -120° |
| Base Film Type | Polycaprol a ctone Alipha tic TPU | Peel Adhetion | ≤ 0.35 （ N / 25mm ） |
| Adhesive Type | Japan Glue | 24h，180°Peel | ≥15（N/ 25mm） |
| Self-healing | PASS | 60° Surface Gloss | 95 |
| Film Thickness | 7.5 mi l | Initial Adhes ive | ≥8（N/ 25mm） |
| Film Specification | 1.52* 15m | Yellowing Resistance | ≤2 |
| Warranty | 5 years | Anti Rock Chips Test | PASS |
| Elongation Rate at Break (TPU FILM) | ＞360% | Yello Resistance | 6000 Hours Pass |
| Elongation Rate at Break ( Hard Coating / MD) | 90 -110（%） | Anti - stain | Novisiblevisiblestain |
1.The elongation at break of the HC protective film shall be as specified in GB/T 1040.1 Determination of Tensile Properties of Plastics, Part 1 General, and the elongation at break of the finished product when the HC coating is broken during the tensile testing;
2. Storage of aging peeling force means that the sample is cured at 65 ° C for 72 hours, and the peeling force test is carried out according to GB/T 2792;
3. Application of aging peeling force means that the sample is cured after being cured at 65 ° C for 72 hours, and then cooled to a natural temperature for 180 ° peeling force testing ;
* Remarks: KOOPPF need to be stored in their original packing and with the original protection materials.. In order to avoid loss of quality, After the package is removed, the remaining parts must be removed the top protective film in time, or else it is possible to cause arching and fogging during the surface.
